TPI Corporation Heater 480V3 Phase 5000W Fan Forced Unit

TPI Corporation

(No reviews yet) Write a Review
$502.30
SKU:
P3P5605T
UPC:
686334707305
Condition:
New
Availability:
In Stock
Adding to cart… The item has been added

Product Overview

DESCRIPTION

TPI Corporation Heater 480V3 Phase 5000W Fan Forced Unit

Fabricated of die formed, heavy gauge steel and finished with two tone, brown and beige, durable powder coated paint. Supply air is drawn through the rear heavy duty expanded steel inlet grill. Heated air is discharged through front adjustable louvers, which are spring loaded for individual adjustment. Made in U.S.A. Heavy-duty block fin element design. The multiple tap electric connection design allows field conversion to eight wattage settings at 240V/480V, 3 Phase. Motor shall be totally enclosed, permanently lubricated, all angle industrial rated with thermal overload protection. Wiring to terminal block adjacent to incoming knockout in accordance with NEC and local codes. All heaters shall be equipped with an automatic reset thermal cutout to shut down the element and motor circuits if unsafe operating temperatures are exceeded. The heater shall have a heavy-duty hydraulic thermostat factory installed and wired. All controls and wiring shall be in a large wiring compartment with hinged door for easy access. An optional disconnect switch shall be available for field installation. Heaters are standard with a three position-mounting bracket for wall, ceiling or workbench. Heaters can be mounted for horizontal or vertical discharge. Note: Minimum mounting height is 6 Ft., and minimum distance from side of heater to nearest wall is 6 In.. Note: Approved for residential applications.

FEATURES

Casing & Construction: Fabricated of die formed, heavy gauge steel and finished with two tone, brown and beige, durable powder coated paint
Element: Heavy-duty block fin element design
Motor: Motor shall be totally enclosed, permanently lubricated, all angle industrial rated with thermal overload protection
Wiring: Wiring to terminal block adjacent to incoming knockout in accordance with NEC and local codes
Thermal Overload: All heaters shall be equipped with an automatic reset thermal cutout to shut down the element and motor circuits if unsafe operating temperatures are exceeded
Controls: The heater shall have a heavy-duty hydraulic thermostat factory installed and wired
Mounting: Heaters are standard with a three position-mounting bracket for wall, ceiling or workbench
ETL-CUS listed

SPECIFICATIONS

Brand Name
TPI Corporation
Air Volume (CFM)
275
Amperage (A)
6
Assembled Weight (lbs)
32
BTU Heat Rating
17065
Country of Origin
United States
ETL Listed
Yes
globalTradeItemNumber (GTIN)
00686334707305
Heater Type
Flameless
Maximum BTU
17065
Maximum CFM
275
Package Contents
Unit Heater
Package Depth
11.75
Package Height
14
Package Weight
32
Thermostat
Yes
Tip-Over Safety Switch
No
UPC
686334707305

Warranty Information

Limited Warranty

Reviews

(No reviews yet) Write a Review